45 degree flammability tester components

The specimen is mounted in the frame on a specimen holder with an inclination of 45°. The specimen holder should be mounted so that the thickness between the specimen and the front of the flame can be adjusted. There is a pointer which, when the specimen holder is correctly adjusted, touches the front of the specimen.

4. The specimen holder consists of two 1.6 mm (1/16 inch) thick matching metal plates with clamping devices along two sides. The specimen is held between the two clamping devices and the plates are loosely slotted for alignment. The two plates of the specimen holder are completely covered except for a width of 38 mm (11/2 in) over the full length of the specimen. The specimen holder is supported at a 45° angle on a shelf in the windproof test cell. 5 specimen holders are to be prepared.

http://thentest.com/News-and-events/1756.html